Vortex Reflux Equipment Kit

​

Powered by VORTEX, connected by CREATE+
The VORTEX is a groundbreaking air-cooled condenser that allows you to operate anywhere without the constraints of cooling water, without sacrificing time or quality, and saving hundreds of litres of water per run.  Complete with two VORTEX Air Cooled Condenser modules, CREATE+ 2" modular components, and connecting tri-clamps and gaskets, the VORTEX Reflux Equipment Kit allows you to run your reflux stup without any additional cooling water needed.

A 2-in-1 equipment kit, the components in this kit can also be reconfigured to support water-free alembic distillation.

​

*Boiler sold separately

​

Full Description

​Powered by VORTEX, connected by CREATE+

The VORTEX is a groundbreaking air-cooled condenser that allows you to operate anywhere without the constraints of cooling water, without sacrificing time or quality, and saving hundreds of litres of water per run.  Complete with two VORTEX Air Cooled Condenser modules, CREATE+ 2" modular components, and connecting tri-clamps and gaskets, the VORTEX Reflux Equipment Kit allows you to run your reflux stup without any additional cooling water needed.

A 2-in-1 equipment kit, the components in this kit can also be reconfigured to support water-free alembic distillation.

The VORTEX Air Cooled condenser utilises forced air to dissipate heat from vapour and liquid and can be used in place of a water-cooled condensers and dephlegmators. A simple turn of a dial controls fan speed and cooling temperatures instantly and puts precision in your hands at every stage.

​

INSTRUCTIONS:

Assemble the CREATE+ modular components with the VORTEX Air Cooled Condenser modules per the instructions.  Attach to your boiler (sold separately) and connect to power.

As vapour or liquid move through the two internal tubes of the condenser, the aluminium fins absorb the heat, which is then dispersed by the three integrated air fans. The speed of the fans can be increased or decreased with the control dial to control the heat dissipation rate, like adjusting the water flow of traditional water-cooled condensers.

​

CLEANING AFTER USE:

To clean, you can use a household vacuum cleaner to remove dust that may collect in the fan grill and the finned tubes over time.  To clean inside the product pathway, conduct a distillation run of equal parts white vinegar and drinking water.

 

CAUTION: Metal fins can have sharp edges.  Use care when handling, assembling, cleaning, or storing this unit, and avoid running fingers along the fin surface.

​

DISCLAIMER: Please note that in certain countries alcohol distillation and the possession of distilling equipment is illegal and permits/licenses may be required. For guidance or advice, contact your relevant local authorities.

​

What's Included

• 2 x VORTEX Air Cooled Condenser Module
• 2 x Universal Power Supply (NZ/AU, US/CA, UK, EU)
• Instruction Booklet
• 500mm Straight Section Tube
• CREATE+ 90° Thermowell Elbow
• CREATE+ 90° Elbow
• CREATE+ Vented Collection Cup
• CREATE+ Beeping Alarm Thermometer
• 2 x CREATE+ 45° Elbow
• 2" Sieved Gasket
• 9 x 2" Silicone Gaskets
• 8 x 2" Tri-Clamps
• 100 g Copper Saddles
• 500 g Stainless Steel Saddles
• Ceramic Boil Enhancers
• Tether System
• 1 m Silicone Tubing