Co2 Gas Cylinders/Regulators
Co2 Gas Cylinders (Full)
CO2 Gas Cylinders 2.6kg
(Full)
$119.00
CO2 Gas Cylinders 6kg
(Full)
$149.00
​
Features:
- Australian Standard Approved
- Hold 2.6kg of gas when full
- Dimensions 47cm high x 14cm diameter
- Comes with included carry handle for easy of transport and protection of valve
- Will fit in Keg Master Series 2 and Series 3 Kegerators without reducing the number of kegs it can hold
​
IMPORTANT - PLEASE READ
BlowTie Complete Kit (Diaphragm Spunding Valve)
BlowTie Complete Kit (Diaphragm Spunding Valve)
​
This Kit Includes:
1 x BlowTie Spunding Valve
1 x duo tight 8mm tee piece
1 x duotight FFL to 8mm fitting
1 x 8mm Push in 0-15psi Gauge
1 x Premium Ball Lock Disconnect (MFL) Grey/Gas
2 x NEW 8mm straight joiner pieces
This kit has been designed for simplicity and ease of putting together.
If you want to control the pressure retained in a pressure vessel that is releasing pressure then the BlowTie Diaphram Spunding Valve is the tool for the job.
The adjustment knob on the top of the unit makes it easy to increase and decrease the set pressure.
This BlowTie unit can be easily disassembled for cleaning using a Phillips head screwdriver.
​
Pressure Fermentations
With pressurised fermentation becoming ever more popular it has become increasingly important to have a method of regulating and controlling this residual pressure from the fermentation process. The BlowTie has been designed specifically for this reason.
​
Pressure Transfers
When transferring from keg to keg, keg to bottle, or fermenter to keg it's often a good idea to have head pressure in the keg you are filling into especially if you are transferring a beverage that is carbonated. For this reason the BlowTie can consistently control this head pressure giving you more consistent results and without losing carbonation in the process.
​
Traditional spunding valves that use a simple spring against a seal are flawed right from the beginning as the physical aspects of the design dictate that you will have a significant difference between the opening pressure and closing pressure during operation. Brewers have tolerated this imperfection for long enough and now you can control these pressures far more accurately.
The BlowTie has been made completely differently taking advantage of a diaphragm to actuate the sealing mechanism that will release pressure from the pressure vessel with much more accurate control pressure.
​
Instructions:
Use the yellow adjustment knob to control the pressure coming out of the pressure vessel. Clockwise is higher pressure and anticlockwise is lower pressure.
We would recommend gassing a keg to a known pressure e.g. 15psi then attach your Blow Tie Kit to the keg and adjust to 10psi.
Specifications:
1. Made from food-grade acetal
2. Stainless screws
3. 8mm (5/16") push on both sides
4. 0-15psi pressure rating
Please note: The joiners are a semi-permanent fitting. You will not be able to remove the fittings easily. If you would like to have a completely removable fitted kit we would suggest using EVABarrier 4mm ID or 5mm ID hose as the joining pieces.
$39.95
High Capacity Disposable Nitrogen (N2) Gas Cylinder - 1.43L - 110Bar
​
High Capacity: 157L
(at standard temperature and pressure)
86 grams
FOOD GRADE
Nitrogen (N2)
Specifications
Cylinder Type: 3 Piece Welded Cro-Molly Alloy
Cylinder Volume: 1.43L
Working Pressure: 110bar (1595.42psi)
Test Pressure: 180bar (2610.68psi)
Directions for use
This bottle is compatible with our KegLand M10 Inert Gas Regulator. It's also compatible with many other regulators already on the market.
1. Remove the protection cap from the valve.
2. Connect the regulator to the cylinder valve. There may be some gas escaping as you're screwing on so screw the gas cylinder into the regulator quickly to limit this loss, continue to screw on until gas stops.
3. Set the outlet flow/pressure on the regulator. Please note to turn off the gas you must remove the regulator from the cylinder.
$39.95
Nitro duokit - Nitrogen (N2) Gas duotight push in kit
​
$99.95
This cylinder will dispense a little over 40L of product.
Stout and nitro coffee requires high pressures (such as 2-3bar/40-60psi) so the product can push through the perforated disk that is inside our nitro spouts.
These elevated pressures require Nitrogen because if CO2 was used at this high pressure the CO2 would absorb into solution and over carbonate your beverage (if it's stored cold). As a result Nitrogen is necessary in this application.
​
Nitrogen doesn't dissolve into solution like CO2. Even at elevated pressures only small amount of nitrogen will dissolve into solution. It doesn't form the weak hydrogen bond with the liquid like CO2 and for that reason it does not dissolve into water based beverages easily like CO2.
Please note this kit DOES NOT INCLUDE gas hose
We would recommend EVA Barrier 4mm ID x 8mm OD
OR EVA Barrier 5mm ID x 8mm OD hosing
This kit includes:
1 x M10 Inert Gas Regulator
1 x Disposable Nitrogen (N2) Gas Cylinder
2 x duotight FFL x 8mm push in fittings
1 x Premium Ball Lock Disconnect MFL (Grey/Gas)
16g Cartridge / Bulbs
Suits both Mini All In One CO2 charger and Premium Regulated Charger Kit. As well as Whipped Cream Dispensers for carbonating water ect.
Typically you will use about 6g per litre of CO2 for carbonating and/or 6g per liter to dispense.
Each $2.50
10 Pack $22.95
Gas Regulators
Inert Gas Regulator for Disposable Cylinder (N2, Ar, CO2 Compatible with M10 Thread)
​
​
​
Includes:
- Swivel nut and barb to suit 4mm ID, 5mm ID or 6.5mm ID beer and gas line.
- 2 x Spare regulator washers
duotight Fitting compatible
To use a push in fitting on this regulator you will need to order 1 x KL06880 - duotight FFL x 8mm Push In
Nitrogen (N2) Compatible
Nitrogen doesn't dissolve as easily into liquid like Carbon Dioxide (CO2). The nitrogen produces tiny bubbles that feel smooth on the tongue, exscenuating a creamy effect in beer/coffee.
Another common taste factor noticed by beer brewers is that it can quell bitterness.
Nitro also accentuates the malt flavours compared to CO2. Other taste factors commonly associated with using nitrogen is a rich mouth feel sensation. These beers/coffees when poured will have a cascading effect in the glass. The nitrogen bubbles appear to be falling to the bottom, while the bubbles in the middle of the glass circle upwards. These systems are extremely popular in new-age coffee shops, as the nitro provides a creamy effect without the need of adding milk!
Argon (Ar) Compatible
Carbon Dioxide (CO2) Compatible
Instructions
Attach the regulator to the top of your disposable cylinder. Turn pressure up to desired level.
$59.95
CO2 Gas Regulator MK4 Dual Gauge Multi Gas -
Type 30
​
​
​
The MK4 Dual Gauge gas regulator (Type 30 for CO2 / Post Mix Gas) is the only regulator you'll ever need to buy. With a large body and precision diaphragm, this regulator provides high flow rates and very accurate adjustments in both psi and kpa.
69.95
Inert Gas Regulator for Disposable Cylinder (N2 - Nitrogen, Ar - Argon, CO2 Compatible with M10 Thread)
​
​
​
Includes:
- Swivel nut and barb to suit 4mm ID, 5mm ID or 6.5mm ID beer and gas line.
- 2 x Spare regulator washers
duotight Fitting compatible
To use a push in fitting on this regulator you will 1 x - duotight FFL x 8mm Push In
Nitrogen (N2) Compatible
Nitrogen doesn't dissolve as easily into liquid like Carbon Dioxide (CO2). The nitrogen produces tiny bubbles that feel smooth on the tongue, exscenuating a creamy effect in beer/coffee.
Another common taste factor noticed by beer brewers is that it can quell bitterness.
Nitro also accentuates the malt flavours compared to CO2. Other taste factors commonly associated with using nitrogen is a rich mouthfeel sensation. These beers/coffees when poured will have a cascading effect in the glass. The nitrogen bubbles appear to be falling to the bottom, while the bubbles in the middle of the glass circle upwards. These systems are extremely popular in new-age coffee shops, as the nitro provides a creamy effect without the need of adding milk!
$49.00
