Brew Master Kegerator Series 4
Keg Master Series 4 Kegerator with Double Intertap SS taps + 2.6kg CO2 Gas Cylinder + 2 x 19 Litre S/S kegs
Keg Master Series 4 Double Intertap SS
The Keg Master Series 4 is the ideal solution for a simple short draw system for the home bar, small restaurant, cafes and bars.
All of our Keg Master kits come with state of the art Full Stainless Intertap Taps.
Double tap systems you can dispense two 19L ball locks / pin lock kegs at the same time and fit a 2.6kg gas cylinder inside. Or one 19L keg and one 30L Kegasaurus with the cylinder on the outside.
Single tap systems, the more popular commercial beer dispensing choice, designed for one 50L keg to be dispensed.
With our new and improved inbuilt Font Fan with toggle on/off function and state of the art beer taps the Series 4 Keg Master from Keg Land will surely not disappoint.
New circuit boards with temperature control, calibration and on-board memory functions as standard.
Improved guard rail system to ensure your beer never slides off accidentally.
State of the art Stainless Intertap Taps as standard.
Increased compressor power while being approximately 20% more electrically efficient.
Improved drip tray & rear cylinder bracket holder.
Glass holder and wire shelf if you wish to convert it back to a normal fridge.
This Series 4 Double Intertap SS package includes:
2 x Intertap Stainless Steel taps and Stainless Steel Short Shanks
EVA Barrier 4mm ID x 8mm OD Beer & Gas Hose, cut to appropriate lengths for tap kit.
1 x duotight push in tee's for gas splitting
Stainless Steel 304 grade font and four mounting bolts.
New! MK4 regulator (type 30 for CO2)
Font Fan with toggle on/off
CO2 Cylinder Bracket Holder
5 in 1 tap and cylinder tool.
Reinforced four point anchored castor wheels
Stainless steel Door
Black reinforced plastic top
4 x Premium MFL Disconnects
4 x Duotight Connectors
2.6kg Co2 Gas Cylinder
2 x 19Litre Stainless Steel Kegs with 5 year Warranty
NEW! 50g StellarClean sample pack
- 600mm Wide
- 640mm Deep
- 840mm Height (excluding castor wheels and the height of guard rail, drip tray or font)
- 890mm Height of the fridge part (including castor wheels but excluding the height of guard rail, drip tray or font)
IMPORTANT NOTE: Always check for leaks before leaving your gas turned on. To perform an easy pressure check turn on the gas. Set the pressure on the regulator, turn off then come back the next day and ensure the system is still set at the same gas pressure. Also once assembly check all hose joins, regulator, and kegs with soapy water for leaks. If you have not connected all your joins completely gas tight you will loose a bottle of gas and this will not be covered under warranty.